Forklift model classification

Sep 03, 2025

Leave a message

Forklifts can generally be divided into three main categories: internal combustion forklifts, electric forklifts, and warehouse forklifts.

 

Internal Combustion Forklifts are further divided into standard internal combustion forklifts, heavy-duty forklifts, container forklifts, and sidecar forklifts.

 

① Standard Internal Combustion Forklifts: These forklifts typically use diesel, gasoline, LPG, or natural gas engines. Their load capacity ranges from 1.2 to 8.0 tons, and their aisle width is generally 3.5 to 5.0 meters. Considering exhaust emissions and noise, they are usually used outdoors, in workshops, or other locations where exhaust emissions and noise are not particularly critical. Because refueling is convenient, they can operate continuously for extended periods and are capable of working in harsh environments (such as rainy weather).

 

② Heavy-Duty Forklifts: These use diesel engines and have a load capacity of 10.0 to 52.0 tons. They are generally used for outdoor operations in industries such as docks and steel mills where heavy loads are handled.

 

③ Container Forklifts
Powered by diesel engines, with a load capacity of 8.0–45.0 tons. They are generally divided into empty container stackers, loaded container stackers, and container front-end cranes. Used for container handling, such as in container yards or port operations.

 

④ Side-mounted Forklifts
Powered by diesel engines, with a load capacity of 3.0–6.0 tons. They can directly pick up goods from the side without turning, therefore mainly used for picking up long, thin goods such as timber and steel bars.

 

Electric Forklifts
Powered by electric motors and batteries. Load capacity of 1.0–8.0 tons, with a typical aisle width of 3.5–5.0 meters. Due to their low pollution and noise levels, they are widely used in indoor operations and other environmentally sensitive applications, such as in the pharmaceutical and food industries. With increasing emphasis on environmental protection, electric forklifts are gradually replacing internal combustion forklifts. Since each battery pack typically needs charging after about 8 hours of operation, spare batteries are required for multi-shift operations.

 

Warehousing

Unmanned forklifts, invented abroad, can operate for 8 hours on a 10-minute charge and have a maximum load capacity of 1000 kg. Warehouse forklifts are primarily designed for handling goods within warehouses. Except for a few (such as manual pallet forklifts) that are manually driven, most are electric motor-driven. They are widely used in the warehousing industry due to their compact size, maneuverability, light weight, and environmental friendliness. For multi-shift operations, electric warehouse forklifts require spare batteries.

 

Pallet Trucks

With a load capacity of 1.6–3.0 tons, an aisle width of 2.3–2.8 meters, and a fork lifting height of approximately 210 mm, these are mainly used for horizontal handling and loading/unloading goods within warehouses. They offer three operating modes: walking, standing, and seated, allowing selection based on efficiency requirements.

 

Stacker Trucks

Electric pallet stackers are divided into fully electric and semi-electric types. As the name suggests, the former controls both driving and lifting electrically, requiring less manual labor. The latter requires manual pulling or pushing of the forklift, while the lifting is electric. Its load capacity is 1.0–2.5 tons, and the operating aisle width is generally 2.3–2.8 meters. Structurally, it has a mast added compared to the electric pallet truck. The fork lifting height is generally within 4.8 meters, and it is mainly used for stacking and unloading goods in warehouses.

Reach trucks have a load capacity of 1.0–2.5 tons. The mast can move forward or retract as a whole. When retracted, the operating aisle width is generally 2.7–3.2 meters, and the maximum lifting height can reach about 11 meters. They are commonly used for medium-height stacking and picking operations in warehouses.

 

Electric picking trucks are used in certain situations (such as supermarket distribution centers) where it is not necessary to ship entire pallets, but rather to pick multiple types of goods according to orders to form a pallet. This process is called picking. Based on the height of the picked goods, electric picking forklifts can be divided into low-level picking forklifts (within 2.5 meters) and medium-high-level picking forklifts (up to 10 meters). Load capacities: 2.0–2.5 tons (low-level), 1.0–1.2 tons (medium-high level, with cab lift).

 

Low-level driven three-way stacker forklift

Typically equipped with a three-way stacker head, the forklift does not require steering; the forks rotate to stack and retrieve goods on both sides. The aisle width is 1.5–2.0 meters, and the lifting height can reach 12 meters. The forklift cab remains on the ground and cannot be raised. Due to limited visibility, it is mainly used for lifting heights below 6 meters.

 

High-level driven three-way stacker forklift

Similar to the low-level driven three-way stacker forklift, the high-level driven three-way stacker forklift also has a three-way stacker head. The aisle width is 1.5–2.0 meters, and the lifting height can reach 14.5 meters. Its cab can be raised, allowing the driver to clearly observe goods at any height and perform picking operations. High-level driving three-way stacker forklifts outperform low-level driving three-way stacker forklifts in efficiency and various performance aspects, and therefore, this type of forklift has gradually replaced low-level driving three-way stacker forklifts.

 

Electric Tractors
Electric tractor units (trailers) are driven by electric motors, utilizing their towing capacity (3.0–25 tons) to pull several small carts loaded with goods. Main classifications include: electric tractor units for airport logistics, electric tractor units for workshops, small electric tractor units, and electric tricycle tractor units. They are frequently used for transporting large quantities of goods within or between workshops, such as transporting goods from automotive manufacturing warehouses to assembly lines, and baggage handling at airports.

 

Autonomous Forklifts
In May 2023, a new generation of intelligent autonomous forklifts was unveiled in Anhui Province. These forklifts integrate next-generation information technologies such as visual recognition, automated control, and big data analysis, deeply integrating artificial intelligence, the Internet of Things, and cloud computing with the manufacturing industry.

Send Inquiry