Forklift usage precautions in summer

Sep 10, 2025

Leave a message

Characteristics of High Temperature and High Humidity High temperature and high humidity conditions significantly impact driver safety.

1. Engine cooling performance deteriorates under high temperatures, leading to overheating and reduced power and fuel economy.

2. Increased risk of radiator overheating, fuel supply system blockage, battery depletion, hydraulic brake failure due to piston cup expansion, and tire bursting due to rising ambient temperature.

3. Lubricating oil (grease) in forklift components thins under high temperature and humidity, reducing lubrication performance and accelerating wear under heavy loads.

4. High temperatures and insect bites disrupt driver sleep, increasing the risk of fatigue and heatstroke, compromising operational safety.

5. Frequent thunderstorms and wet roads/loading areas reduce traction, increasing the risk of skidding and endangering forklifts, personnel, and goods.

 

Precautions for Driving and Operating Vehicles

1. Before the heatwave season begins, prepare in advance by draining winter lubricating grease from the engine, drive axle, transmission, steering gear, etc., and then adding summer lubricating grease as specified after cleaning.

2. Clean the water passages, remove scale from the cooling system, and unblock the radiator fins. Regularly check the tension of the fan drive belt.

3. Adjust the generator regulator appropriately to reduce the generator charging current.

4. During operation, prevent the engine from overheating. Monitor the coolant temperature gauge reading constantly. If the coolant temperature is too high, take cooling measures. Maintain the coolant level, and when adding coolant, be careful to prevent boiling and burns.

5. Regularly check tire temperature and pressure. If necessary, park in a shady place and wait for the tires to cool down before continuing operation. Do not use methods such as releasing air or pouring cold water to reduce pressure and temperature, as this will shorten tire life.

6. Regularly check brake performance to prevent brake failure caused by aging, swelling, or deformation of the master cylinder or wheel cylinder piston cups, or brake fluid vaporization.

7. Adjust the electrolyte density of the battery and clear the vent holes on the battery cover. Maintain the electrolyte level 10-15mm above the separator. Add distilled water as needed.

8. Ensure sufficient sleep before operation to maintain alertness. If you feel fatigued, drowsy, or slowed down during operation, stop the vehicle immediately and rest. Alternatively, splash your face with cold water to refresh yourself and ensure safe driving and operation.

9. Take precautions against heatstroke.

 

Finally, after confirming that all parts are in good condition, the battery can be put into normal use.

Send Inquiry