Common excavators are classified into two types based on their drive system: internal combustion engine-driven excavators and electric-driven excavators. Electric excavators are primarily used in high-altitude, oxygen-deficient environments, underground mines, and other flammable and explosive locations.
Based on size, excavators can be categorized into large excavators, medium-sized excavators, and small excavators.
Based on their locomotion method, excavators can be divided into tracked excavators and wheeled excavators.
Based on their transmission method, excavators can be divided into hydraulic excavators and mechanical excavators. Mechanical excavators are mainly used in large mines.
Based on their application, excavators can be further classified into general-purpose excavators, mining excavators, marine excavators, and special-purpose excavators.
Based on their bucket, excavators can be divided into front shovel excavators, backhoe excavators, dragline excavators, and clamshell excavators. Front shovel excavators are mainly used for excavating materials above ground, while backhoe excavators are mainly used for excavating materials below ground.
1. Backhoe Excavator: The backhoe is the most common type we see. It moves backward and downward, forcibly cutting the soil. It can be used for excavation below the working face. Basic operating methods include: trench end excavation, trench side excavation, straight excavation, curved excavation, excavation at a certain angle, ultra-deep trench excavation, and trench slope excavation.
2. Front Shovel Excavator: The front shovel excavator's digging action is "forward and upward, forcibly cutting the soil." Front shovels have a large digging force and can excavate soil above the working face. They are suitable for excavating dry foundation pits with a height greater than 2m, but ramps are required. The bucket of a front shovel is larger than that of a backhoe excavator of the same capacity. It can excavate soil of classes I to III with a moisture content of no more than 27%, and can be used in conjunction with dump trucks to complete the entire excavation and transportation operation. It can also excavate large dry foundation pits and mounds. The excavation methods of front shovel excavators vary depending on the relative position of the excavation route and the transport vehicle. There are two main methods for digging and unloading: digging forward and unloading laterally; or digging forward and unloading in reverse.
3. Dragline Excavator
A dragline excavator, also called a cable excavator, is characterized by its backward and downward cutting motion, utilizing its own weight. It is suitable for excavating Class I and II soils below the machine's stopping surface. During operation, it uses inertia to throw the bucket out, digging a relatively long distance with a large digging radius and depth, but it is not as flexible and accurate as a backhoe. It is particularly suitable for excavating large and deep foundation pits or underwater excavation.
4. Clamshell Excavator
A clamshell excavator, also called a grab bucket excavator, is characterized by its straight up and down cutting motion, utilizing its own weight. It is suitable for excavating Class I and II soils below the machine's stopping surface and is commonly used in soft soil areas for excavating foundation pits and caissons. Especially suitable for digging deep and narrow foundation pits, dredging existing channels, and removing silt from water, or for loading loose materials such as gravel and slag. There are two excavation methods: trench-side excavation and positional excavation. If the grab bucket is made into a grid shape, it can also be used in timber yards to load ore blocks, wood chips, and timber.
Currently, the vast majority of excavators are fully hydraulic, full-rotation excavators. Hydraulic excavators mainly consist of an engine, hydraulic system, working device, traveling device, and electrical control system. The hydraulic system consists of a hydraulic pump, control valves, hydraulic cylinders, hydraulic motors, pipelines, and an oil tank. The electrical control system includes a monitoring panel, engine control system, pump control system, various sensors, and solenoid valves.
Hydraulic excavators generally consist of three main parts: the working device, the upper body, and the lower body. Based on their construction and purpose, they can be classified into various types, including tracked, wheeled, walking, fully hydraulic, semi-hydraulic, full-rotation, non-full-rotation, general-purpose, special-purpose, articulated, and telescopic boom excavators.
The working device is the unit that directly performs the excavation task. It consists of three hinged parts: the boom, stick, and bucket. To adapt to various construction operations, hydraulic excavators can be equipped with a variety of working devices, such as digging, lifting, loading, leveling, clamping, bulldozing, impact hammers, and rotary drilling rigs.
The slewing and traveling mechanism is the body of the hydraulic excavator, with the power unit and transmission system located on the upper part of the turntable. The engine is the power source of the hydraulic excavator, mostly using diesel fuel, but an electric motor can be used in suitable locations.
The hydraulic transmission system transmits the engine's power to hydraulic motors, hydraulic cylinders, and other actuators through a hydraulic pump, driving the working device to complete various tasks.
