Forklift Models And Configurations

Oct 04, 2025

Leave a message

The selection of forklift models and configurations generally considers the following aspects:

 

Operating Functions: Basic forklift operating functions include horizontal transport, stacking/picking, loading/unloading, and order picking. The specific models can be initially determined based on the desired operating functions. Additionally, special operating functions will affect the specific configuration of the forklift. For example, when handling paper rolls or molten iron, attachments are required to complete the special functions.

 

Operating Requirements:Forklift operating requirements include general requirements such as pallet or cargo specifications, lifting height, aisle width, and gradeability. Operating efficiency (different models have different efficiencies) and operating habits (e.g., whether the forklift is seated or standing) also need to be considered.

 

Operating Environment: If the goods being handled or the warehouse environment has environmental requirements regarding noise or exhaust emissions, these should be considered when selecting the model and configuration. If the environment is cold storage or has explosion-proof requirements, the forklift configuration should be either cold storage type or explosion-proof type. Carefully examine the locations the forklift will traverse during operation, anticipating potential problems. For example, will door height affect the forklift when entering and exiting the warehouse? How will elevator height and load capacity affect the forklift when entering and exiting elevators? Does the floor load-bearing capacity meet the requirements when operating on upper floors?

 

When selecting and determining the configuration, describe the working conditions in detail to the forklift supplier and conduct an on-site inspection to ensure that the purchased forklift fully meets the company's needs. Even after completing the above analysis, several models may still meet the requirements simultaneously. In this case, the following aspects need attention:

① Different models have different working efficiencies, thus requiring different numbers of forklifts and drivers, leading to a series of cost changes. See the performance evaluation section of this document for a detailed discussion of costs.

② If the forklift operates within the warehouse, different models require different aisle widths and have varying lifting capacities, resulting in changes to the warehouse layout, such as changes in the amount of goods stored.

③ Changes in the model and its quantity will affect many aspects, including fleet management.

④ Different vehicle models have varying market share and after-sales support capabilities. For example, both low-level and high-level driver-operated three-way stacker forklifts belong to the narrow aisle forklift series, capable of stacking and retrieving goods within very narrow aisles (1.5-2.0 meters). However, the former's cab cannot be raised, resulting in poorer operator visibility and lower work efficiency. Since the latter fully covers the functions of the former and offers superior performance, its market share in Europe is 4-5 times higher, and in China, it's over 6 times higher. Therefore, most suppliers focus on developing high-level driver-operated three-way stacker forklifts, while low-level driver-operated three-way stacker forklifts are only used for small-tonnage, low-lifting-height applications (generally within 6 meters). When market sales are low, the number of after-sales service engineers, their experience, and spare parts inventory levels will be relatively weak.

 

The most reasonable solution should be selected after comprehensively evaluating the impact of all these factors.

Send Inquiry